Center Panel ASSY

Attach the protective tape (a) to the meter visor.
Remove the center panel assembly.
CAUTION: Do not put your finger on the fin of the air vent grille. Doing so may damage the fin.
1. Attach the protective tape (a) to the meter visor.
  
  Fig 1: Identifying Protective Tape
  Courtesy of SUBARU OF AMERICA, INC.
2. Insert a finger into the air vent grille and release the left and right clips at the top of the center panel. (A), (B)
3. Insert a finger into the air vent grille and release the left and right clips at the center of the center panel. (C), (D)
4. Release the clips at the bottom of the center panel and remove the center panel assembly.
  
  Fig 2: Removing Center Panel Assembly
  Courtesy of SUBARU OF AMERICA, INC.