The Keyless Access Passenger Room Buzzer Does Not Sound
CAUTION:
- Inspect LAN system according to the basic diagnostic procedure, and make sure that there is no fault.
- Check that the keyless access function is not stopped.
- When the access key or keyless access CM is replaced, registration of the immobilizer is required. For the relevant procedures, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK COMBINATION METER. Check the combination meter. |
Is combination meter OK? | Replace the keyless access CM. < Refer to KEYLESS ACCESS CM . > | Replace the combination meter. < Refer to REMOVAL , Combination Meter. > |