Keyless Access External Buzzer Does Not Beep

Step	Check	Yes	No
1 CHECK BUZZER OPERATION. Use the Subaru Select Monitor to perform the body integrated unit function check «Keyless Buzzer Output». < Refer to OPERATION , Function Check. >	Does the buzzer sound?	Go to step 2 .	Check the buzzer circuit.
2 CHECK KEYLESS ACCESS SYSTEM CHECK. Using the Subaru Select Monitor, from the Keyless access system check of keyless access CM, perform the «System check». < Refer to OPERATION , Keyless Access System Check. >	Does the buzzer sound in each mode?	Currently, system is normal.	Check the buzzer circuit.