LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Access Buzzer >> Removal

Access Buzzer: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the front bumper face assembly. Refer to REMOVAL .
  3. Remove the access buzzer.
    1. Disconnect the connector.
    2. Remove the clip and detach the access buzzer.
      Fig 1: Disconnecting Access Buzzer Connector
      G08584987Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals