Wiper Blade: Assembly: Rear

Fig 1: Identifying Wiper Rubber Claw

Courtesy of SUBARU OF AMERICA, INC.

Insert the wiper rubber into claw (B).

Fig 2: Inserting Wiper Rubber Into Claw
Courtesy of SUBARU OF AMERICA, INC.
Insert the wiper rubber until its top end protrudes approx. 20 mm (0.79 in) from stopper (D).

Fig 3: Identifying Wiper Rubber Top End Protrusion From Stopper
Courtesy of SUBARU OF AMERICA, INC.
Insert the wiper rubber into claw (A).

Fig 4: Inserting Wiper Rubber Into Claw
Courtesy of SUBARU OF AMERICA, INC.