LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Wiper Blade >> Assembly >> Front

Wiper Blade: Assembly: Front

  1. Insert the wiper rubber onto the blade so that the stopper is in the position shown in the figure.
    Fig 1: Locating Wiper Rubber Stopper Position (Front)
    G06653526Courtesy of SUBARU OF AMERICA, INC.
  2. Make sure the wiper rubber is securely fastened to the pull stopper (A).
    Fig 2: Securing Wiper Rubber To Pull Stopper
    G05957762Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals