LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Rear Wiper Arm >> Installation

Rear Wiper Arm: Installation

  1. Install in the reverse order of removal.
  2. Operate the rear wiper once.
  3. Align the blade with the marking on the glass.
    Fig 1: Identifying Aligning Mark On Blade And Glass
    G06653557Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    < Refer to  REAR WIPER  , COMPONENT, General Description. >