LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Side Turn Signal Light Assembly >> Inspection

Side Turn Signal Light Assembly: Inspection

  1. Install the side turn signal light assembly and check that it blinks normally.
  2. If it is found not to blink normally, replace the side turn signal light assembly with a new part.
    NOTE: Since LED (Light Emitting Diode) is used for the side turn signal light, replace the side turn signal light assembly if the LED burns out.
scientia non olet · About LEMON Manuals