LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Rear Finisher Light Assembly >> Removal >> Sedan Model

Sedan Model

  1. Disconnect the ground cable from battery.
  2. Remove the trunk lid trim. Refer to REMOVAL .
  3. Remove the rear finisher light assembly.
    1. Disconnect the connector.
    2. Remove the nuts and bolts and remove the rear finisher light assembly.
      Fig 1: Removing Rear Finisher Light Assembly
      G06653476Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals