LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> High-mounted Stop Light >> Inspection

High-mounted Stop Light: Inspection

  1. Install the high-mounted stop light to test if it illuminates normally.
  2. If it fails to illuminate normally, replace the high-mounted stop light with a new part.
    NOTE: Since LED (Light Emitting Diode) is used for the high-mounted stop light, replace the high-mounted stop light assembly if the LED burns out.
scientia non olet · About LEMON Manuals