LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Headlight Bulb >> Removal >> Low Beam

Low Beam

CAUTION:
  • Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb's service life. Hold the flange portion when replacing the bulb. Never touch the glass portion.
  • Do not leave the headlight without a bulb and back cover for a long time. Dust, moisture, etc. entering the headlight may affect its performance.
  1. Disconnect the ground cable from battery.
  2. Remove the clips and remove the air intake duct. (When removing the headlight low beam bulb RH)
    Fig 1: Locating Air Intake Duct Mounting Clips
    G08583851Courtesy of SUBARU OF AMERICA, INC.
  3. Turn the steering wheel in the opposite direction from the parts to be removed. Then remove the clips and turn over the mud guard.
    Fig 2: Removing Mud Guard Mounting Clips
    G07916072Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the headlight low beam bulb.
    1. Remove the back cover.
      Fig 3: Removing Back Cover
      G06653441Courtesy of SUBARU OF AMERICA, INC.
    2. Unlock the bulb socket and bulb spring, and remove the headlight low beam bulb.
      Fig 4: Removing Headlight Low Beam Bulb
      G06653442Courtesy of SUBARU OF AMERICA, INC.