LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Day Time Running Resistor >> Removal

Day Time Running Resistor: Removal

  1. Remove the front bumper face assembly. Refer to REMOVAL .
  2. Remove the daytime running resistor.
    1. Disconnect the connector.
    2. Remove the bolt, and remove the daytime running resistor.
      Fig 1: Locating Daytime Running Resistor Mounting Bolt
      G06653507Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals