Diagnostic Procedure
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK ECM. Check the part number of the ECM. |
Is the ECM genuine? | Go to step 2 . | Replace the ECM. |
2 CHECK STEREO CAMERA.
|
Is the stereo camera genuine? | Go to step 3 . | Replace the stereo camera. |
| 3 CHECK LAN SYSTEM. Perform the diagnosis for LAN system. < Refer to PROCEDURE , Basic Diagnostic Procedure. > |
Is DTC displayed? | Perform the diagnosis according to DTC. | Go to step 4 . |
| 4 CHECK ECM. Perform the diagnosis for the engine. < Refer to BASIC DIAGNOSTIC PROCEDURE . > |
Is DTC displayed? | Perform the diagnosis according to DTC. | Go to step 5 . |
| 5 CHECK CONNECTOR. Check the ECM connector and the stereo camera connector. |
Is the connector OK? | Go to step 6 . | Repair or replace the connector. |
| 6 CHECK STEREO CAMERA. Read the DTC. |
Is another DTC displayed? | Perform the diagnosis according to DTC. | Go to step 7 . |
7 CHECK STEREO CAMERA.
|
Is the same DTC displayed? | Replace the stereo camera. < Refer to REMOVAL , Stereo Camera. > | Temporary poor contact. |