| 1 |
CRUISE switch is not turned ON. (CRUISE indicator does not illuminate.) Or the cruise control is cancelled without CRUISE switch operation. |
(1) Perform cruise cancel conditions diagnosis. |
Perform the diagnosis according to displayed cancel code. |
| (2) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (3) Check the cruise control command switch. |
Refer to
11 . |
| (4) Check the CRUISE indicator. |
Refer to
CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT . |
| 2 |
Cruise control cannot be set. Or the cruise control is cancelled without canceling operation. |
(1) Perform cruise cancel conditions diagnosis. |
Perform the diagnosis according to displayed cancel code. |
| (2) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (3) Check the cruise control command switch. |
Refer to
11 . |
| (4) Check stop light switch and brake switch. |
Refer to
STOP LIGHT SWITCH
. Refer to
12 . |
| (5) Check clutch switch. |
Refer to
CLUTCH SWITCH
. Refer to
13 . |
| (6) Check the neutral position switch. |
Refer to
14 . Refer to
62 . |
| (7) Check vehicle speed sensor. |
Refer to
22 . |
| 3 |
SET indicator does not illuminate. |
Check the SET indicator. |
Refer to
CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT . |
| 4 |
Vehicle speed is not held within set speed ±3 km/h (±2 MPH). |
Check the vehicle speed sensor. |
Refer to
22 . |
| 5 |
Vehicle speed does not increase or does not return to set speed after RES/+ switch has been pressed. |
(1) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (2) Check the RES/+ switch. |
Refer to
11 . |
| 6 |
Vehicle speed does not decrease after SET/- switch has been pressed. |
(1) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (2) Check the SET/- switch. |
Refer to
11 . |
| 7 |
Cruise control is not released after CANCEL switch has been pressed. |
(1) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (2) Check the CANCEL switch. |
Refer to
11 . |
| 8 |
Cruise control is not released after brake pedal has been depressed. |
(1) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (2) Check stop light switch and brake switch. |
Refer to
12 . Refer to
INSTALLATION
. |
| 9 |
Cruise control is not released after shifting to the neutral position. |
(1) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (2) Check the neutral position switch. |
Refer to
14 . Refer to
NEUTRAL POSITION SWITCH
. |
| 10 |
Cruise control is not released after clutch pedal has been depressed. |
(1) Perform the real-time diagnosis. |
Check the input signal of cruise control system. |
| (2) Check clutch switch. |
Refer to
13 . Refer to
CLUTCH SWITCH
. |