Check Cruise Indicator Light And Cruise Set Indicator Light: Trouble Symptom
Cruise control can be set, but the CRUISE indicator and SET indicator do not illuminate.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT. Check the combination meter. Refer to OPERATION . |
Do the CRUISE & SET indicators illuminate? | Go to step 2 . | Replace the meter case assembly. Refer to COMBINATION METER . |
| 2 CHECK LAN SYSTEM. Perform the diagnosis for LAN system. Refer to BASIC DIAGNOSTIC PROCEDURE . |
Is a DTC of the LAN system detected? | Perform the diagnosis according to DTC for LAN system. | Replace the ECM. |