DTC U1219 Can-HS EPB Data Abnormal: Trouble Symptom

Electronic parking brake cooperation control does not operate.

DIAGNOSTIC PROCEDURE

Step	Check	Yes	No
1 CHECK DTC. Using the Subaru Select Monitor, read all DTCs.	Is there DTC other than CAN system?	Perform the diagnosis according to DTCs for other control modules.	Go to step 2 .
2 CHECK DTC. Check DTC indicated in CAN system.	Is U1219 a current malfunction?	Go to step 3 .	Go to step 4 .
3 CHECK DTC. Turn the ignition switch to OFF, and read the DTC again.	Is U1219 a current malfunction?	Replace the electronic parking CM. Refer to REMOVAL .	Go to step 4 .
4 CHECK ELECTRIC PARKING CM. Disconnect the electronic parking CM connector. Using the Subaru Select Monitor, perform the clear memory. Using the Subaru Select Monitor, read DTC of CAN system.	Is the displayed DTC other than U1219?	Go to step 5 .	Replace the electronic parking CM. Refer to REMOVAL .
5 CHECK ELECTRIC PARKING CM. Connect the electronic parking CM connector. Using the Subaru Select Monitor, read DTC of electronic parking CM. Refer to OPERATION .	Is DTC other than CAN system displayed?	Perform the diagnosis according to DTC.	Replace the body integrated unit. Refer to REMOVAL .