LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Touring >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Hose and Pipe >> Installation

Hose and Pipe: Installation

CAUTION:
  • Replace the O-rings with new parts.
  • When connecting hoses, do not apply an excessive force to them. After installing, check that no torsion or excessive tension applied to the hoses.
  1. Install each part in the reverse order of removal.
  2. Charge refrigerant. < Refer to PROCEDURE , Refrigerant Charging Procedure. >

    Tightening torque: 

    Refer to "COMPONENT" of "General Description". < Refer to  AIR CONDITIONING UNIT  , COMPONENT, General Description. > 

scientia non olet · About LEMON Manuals