EGR Control Valve: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Use new O-rings and gaskets.

Tightening torque:

22 N.m (2.2 kgf-m, 16.2 ft-lb)

Fig 1: Locating EGR Control Valve Mounting Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

3 N.m (0.3 kgf-m, 2.2 ft-lb)

Fig 2: Locating Hose Clamp Bolts

Courtesy of SUBARU OF AMERICA, INC.