LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls (Diagnostics) (H4DO)) >> System Operation Check Mode >> Operation >> Idling Ignition Timing Fixed

Idling Ignition Timing Fixed

WARNING: This page is about a different variant/trim than selected.
CAUTION: After executing the system operation check mode, execute the Clear Memory Mode. < Refer to OPERATION , Clear Memory Mode. >
  1. On «System Operation Check Mode» display, select {Fixed Idle Ignition Timing}.
  2. On «Start the Engine» display, start the engine and click the [OK] button.
  3. On «Fixed Idle Ignition Timing» display, click the [Execution] button and execute the idling ignition timing fixed.
  4. Click the [Cancel] button to stop the idling ignition timing fixed.
  5. Click the [[f12]Exit] button to end the idle ignition timing fixed. The screen will return to the «System Operation Check Mode» screen.
    NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals