LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls (Diagnostics) (H4DO)) >> Subaru Select Monitor >> Operation >> V.I.N Registration

V.I.N Registration

WARNING: This page is about a different variant/trim than selected.
  1. On «Main Menu» display, select {Each System Check}.
  2. On «System Selection Menu» display, select {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display, select {Entry VIN}.
  5. Perform the procedures shown on the display screen.