Diagnostics for Engine Starting Failure: Procedure
WARNING: This page is about a different variant/trim than selected.
| 1. Check of the fuel amount |
| ↓ |
| 2. Inspection of starter motor circuit < Refer to STARTER MOTOR CIRCUIT , Diagnostics for Engine Starting Failure. > |
| ↓ |
| 3. Inspection of ECM power supply and ground line < Refer to CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) , Diagnostics for Engine Starting Failure. > |
| ↓ |
| 4. Inspection of ignition control system < Refer to IGNITION CONTROL SYSTEM , Diagnostics for Engine Starting Failure. > |
| ↓ |
| 5. Inspection of fuel pump circuit < Refer to FUEL PUMP CIRCUIT , Diagnostics for Engine Starting Failure. > |
| ↓ |
| 6. Inspection of fuel injector circuit < Refer to FUEL INJECTOR CIRCUIT , Diagnostics for Engine Starting Failure. > |