LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls (Diagnostics) (H4DO)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P014C O2 Sensor Slow Response - Rich To Lean (Bank 1 Sensor 1) >> DTC Detecting Condition

DTC P014C O2 Sensor Slow Response - Rich To Lean (Bank 1 Sensor 1): DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode < Refer to OPERATION , Clear Memory Mode. >, and Inspection Mode < Refer to PROCEDURE , Inspection Mode. >.
DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK EXHAUST SYSTEM. 
NOTE: Check the following items.
  • Loose installation of front portion of exhaust pipe onto cylinder heads
  • Loose connection between front exhaust pipe and front catalytic converter
  • Damage of exhaust pipe resulting in a hole
Is there any fault in exhaust system? Repair the exhaust system. Replace the front oxygen (A/F) sensor. < Refer to FRONT OXYGEN (A/F) SENSOR . >