DTC P0038 Ho2S Heater Control Circuit High (Bank 1 Sensor 2): DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Detected when two consecutive driving cycles with fault occur.
GENERAL DESCRIPTION < Refer to DTC P0038 HO2S HEATER CONTROL CIRCUIT HIGH (BANK 1 SENSOR 2) , Diagnostic Trouble Code (DTC) Detecting Criteria. >

CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode < Refer to OPERATION , Clear Memory Mode. >, and Inspection Mode < Refer to PROCEDURE , Inspection Mode. >.