Release Bearing

WARNING: This page is about a different variant/trim than selected.

CAUTION: Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.

Check the bearing for smooth movement by applying force to the bearing in the radial direction.
Radial direction stroke:

1.6 mm (0.063 in)

Fig 1: Bearing Case Radial Direction Stroke
Courtesy of SUBARU OF AMERICA, INC.
While applying force to the bearing in the rotational direction, check the bearing for smooth rotation.

Fig 2: Checking Bearing Case Rotation
Courtesy of SUBARU OF AMERICA, INC.
Check for wear and damage at the bearing case surface in contact with the lever.