Clutch Switch: Adjustment

WARNING: This page is about a different variant/trim than selected.

Loosen the lock nut of the clutch start switch.

Fig 1: Identifying Lock Nut And Clutch Start Switch
Courtesy of SUBARU OF AMERICA, INC.
Fully depress the clutch pedal and hold it.
Adjust the gap of the clutch pedal plate and the clutch start switch to be 2.0 - 2.5 mm (0.08 - 0.10 in).

Fig 2: Identifying Gap Between Clutch Pedal Plate And Clutch Switch
Courtesy of SUBARU OF AMERICA, INC.
Tighten the lock nut.
Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)