Clutch Pipe and Hose: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Bleed air from the clutch fluid. < Refer to CLUTCH FLUID AIR BLEEDING . >

Tightening torque:

T1: 15 N.m (1.5 kgf-m, 11.1 ft-lb)

T2: 18 N.m (1.8 kgf-m, 13.3 ft-lb)

T3: 25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 1: Clutch Pipe, Clamp And Clutch Hose With Torque Specifications

Courtesy of SUBARU OF AMERICA, INC.