Enable Conditions
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Elapsed time after starting the engine | ≤ 40 s |
| Engine coolant temperature | ≤ 70 °C(158 °F) |
| Engine speed | 1200 rpm - 2950 rpm |
| Intake manifold pressure (absolute pressure) | < 44 kPa (330 mmHg, 13 inHg) |
| Ambient air temperature | ≤ 5 °C(41 °F) |
| Throttle position | < 0.25 ° |
| Battery voltage | ≤ 10.9 V |
| Atmospheric pressure | ≤ 75 kPa (563 mmHg, 22.2 inHg) |
| Vehicle speed | ≤58 km/h (36 MPH) |
| Fuel shut-off function | In operation |
| Neutral switch | OFF |
| Elapsed time after neutral switch ON/OFF change | ≤ Value from Map |
| No load change (A/C, power steering, lighting, rear defogger, heater fan and radiator fan) | ≤ 5000 ms |
MAP
| Engine coolant temperature °C (°F) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) |
| Elapsed time after neutral switch change msec | 580 | 530 | 480 | 440 | 400 | 360 | 330 | 310 |
ENABLE CONDITION
| Engine coolant temperature °C (°F) | 40 (104) | 50 (122) | 60 (140) | 70 158) | 80 (176) | 90 (194) | 100 (212) | 110 (230) |
| Elapsed time after neutral switch change msec | 300 | 290 | 280 | 280 | 280 | 280 | 280 | 280 |