LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Touring >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Rear Seat >> Installation

Rear Seat: Installation

CAUTION: If the hooks on the vehicle body side is disengaged (remained on the seat cushion side) when removing the rear seat cushion, always replace with new hooks to prevent the decline of the fixed force of the seat.
Fig 1: Identifying Rear Seat Cushion Hook
G06347514Courtesy of SUBARU OF AMERICA, INC.
  1. Install each part in the reverse order of removal.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description". < Refer to  REAR SEAT  , COMPONENT, General Description. > 

  2. Route the seat belt securely. < Refer to INSTALLATION , Rear Seat Belt. >
scientia non olet · About LEMON Manuals