Read Diagnostic Trouble Code (DTC): Operation
- On the «Main Menu» display screen, select {Each System Check}.
- On the «Each System Check» menu display screen, select the {Integ. unit mode}.
- Select the [OK] after the information of body integrated unit type is displayed.
- On the «Integ. unit mode» display screen, select the {Diagnostic Code(s) Display}.
- Record the DTC displayed.NOTE:
- For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)".< Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >