Purge Control Solenoid Valve 2

WARNING: This page is about a different variant/trim than selected.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting/Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove the solenoid valve bracket assembly from the intake manifold.

Fig 2: Locating Solenoid Valve Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and the vacuum hose from purge control solenoid valve 2.
Remove the purge control solenoid valve 2 from the solenoid valve bracket assembly.

Fig 3: Locating Solenoid Valve Bracket Assembly
Courtesy of SUBARU OF AMERICA, INC.