LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester X Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission Control Systems (Aux. Emission Control Devices) (H4DOTC)) >> Purge Control Solenoid Valve >> Removal >> Purge Control Solenoid Valve 1

Purge Control Solenoid Valve 1

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting/Connecting Battery Ground Cable
    G06336085Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolts which secure purge control solenoid valve 1 to the intake manifold, and disconnect the connector from the purge control solenoid valve 1.
    Fig 2: Identifying Purge Control Solenoid Valve 1 Bolts
    G05660632Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the vacuum hose from purge control solenoid valve 1.
scientia non olet · About LEMON Manuals