LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester X Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission Control Systems (Aux. Emission Control Devices) (H4DOTC)) >> Pressure Control Solenoid Valve Assembly >> Removal

Pressure Control Solenoid Valve Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting/Connecting Battery Ground Cable
    G06336085Courtesy of SUBARU OF AMERICA, INC.
  2. Lift up the vehicle.
  3. Disconnect the connector (A) and evaporation hose (B) from the pressure control solenoid valve assembly.
  4. Remove the nut (C) securing the bracket to the fuel tank and remove the pressure control solenoid valve assembly.
    Fig 2: Identifying Connector, Evaporation Hose And Nut
    G08539002Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals