Malfunction Indicator Light Does Not Come On: Trouble Symptom
WARNING: This page is about a different variant/trim than selected.
When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. | Is DTC of LAN system displayed? < Refer to OPERATION , Read Diagnostic Trouble Code (DTC). > | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Replace the meter case assembly of combination meter. < Refer to COMBINATION METER . > |