LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester X Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection System (H4DOTC)) >> Camshaft Position Sensor >> Removal >> Camshaft Position Sensor RH

Camshaft Position Sensor RH

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting/Connecting Battery Ground Cable
    G06336085Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector (A) from the camshaft position sensor RH, and remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Locating Camshaft Position Sensor RH Mounting Bolts
    G08539863Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals