LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester X Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (H4DOTC)) >> V-belt >> Removal >> Front Side Belt

Front Side Belt

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Remove the air intake duct (Rear). < Refer to REMOVAL , Air Intake Duct. >
  3. Remove the collector cover bracket.
    Fig 1: Locating Collector Cover Bracket Mounting Bolts
    G05954415Courtesy of SUBARU OF AMERICA, INC.
  4. Loosen the bolt (A).
  5. Loosen the slider bolt (B).
  6. Remove the front side belt (C).
    Fig 2: Identifying Front Side Belt And Slider Mounting Bolts
    G08563433Courtesy of SUBARU OF AMERICA, INC.