Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine speed | ≥ 500 rpm |
| and | |
| < 10000 rpm | |
| Elapsed time after starting the engine | ≥ 9000 ms |
| After secondary air system stops | ≥ 9000 ms |
| Amount of intake air | ≥ 2 g/s (0.07 oz/s) |
| and | |
| < 400 g/s (14.11 oz/s) | |
| Battery voltage | ≥ 10.9 V |
| Engine load | > 0 g/rev |
| After fuel cut | ≥ 1000 ms |