Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the generator from the bracket. < Refer to REMOVAL , Generator. >
Disconnect the terminal from oil pressure switch.

Fig 2: Identifying Oil Pressure Switch Terminal
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil pressure switch.

Fig 3: Identifying Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.