LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System - Exhaust (H6DO - 3.6L DOHC) >> Rear Exhaust Pipe >> Removal

Rear Exhaust Pipe: Removal

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Lift up the vehicle.
  2. Remove the rear exhaust pipe from the front exhaust pipe assembly.
    Fig 1: Locating Rear Exhaust Pipe Nuts
    G06651467Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the rear exhaust pipe from the muffler.
    CAUTION: Be careful not to drop the rear exhaust pipe.
    • LH side
      Fig 2: Locating Rear Exhaust Pipe Bolts - LH Side
      G05018846Courtesy of SUBARU OF AMERICA, INC.
    • RH side
    Fig 3: Locating Rear Exhaust Pipe Bolts - RH Side
    G05031382Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the rear exhaust pipe from the cushion rubber.
    CAUTION: Be careful not to let the muffler contact the rear bumper.
    Fig 4: Locating Rear Exhaust Pipe Cushion Rubber
    G05018848Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the rear exhaust pipe.