Exhaust System - Exhaust (H6DO - 3.6L DOHC): Muffler: Installation

Install in the reverse order of removal.

NOTE:

Use a new gasket and self-locking nut.
After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.

Tightening torque:

48 N.m (4.9 kgf-m, 35.4 ft-lb)

LH side

Fig 1: Locating Rear Exhaust Pipe Nut - LH Side
Courtesy of SUBARU OF AMERICA, INC.
RH side

Fig 2: Locating Rear Exhaust Pipe Nut - RH Side

Courtesy of SUBARU OF AMERICA, INC.