Rear Wiper Arm

Rear Wiper Arm

REMOVAL
1. Pull up the wiper arm cover.
2. Remove the nut and remove the wiper arm.






INSTALLATION
1. Install in the reverse order of removal.
2. Operate the rear wiper once.
3. Align the blade with the marking on the glass.






Tightening torque:
T1: 7 N.m (0.71 kgf-m, 5.2 ft-lb)
T2: 8 N.m (0.82 kgf-m, 5.9 ft-lb)