DTC 11 Driver's Airbag Failure

DTC 11 DRIVER'S AIRBAG FAILURE

NOTE: Be sure to properly identify the Airbag system type prior to performing any diagnostics.

TYPE A
DTC DETECTING CONDITION:
- Airbag main harness circuit is open, shorted or shorted to ground.
- Airbag module harness (Driver's side) circuit is open, shorted or shorted to ground.
- Roll connector circuit is open, shorted or shorted to ground.
- Airbag control module is faulty.
- Driver's airbag module is faulty.

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Caution

NOTE: Prior to starting work, prepare two AIRBAG RESISTORs (98299PA040).

WIRING DIAGRAM:
















TYPE B
DTC DETECTING CONDITION:
- Airbag main harness circuit is shorted to ground.
- Airbag module harness (driver's side) circuit is shorted to ground.
- Roll connector circuit is shorted to ground.
- Driver's airbag module is faulty.
- Airbag control module is faulty.

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Caution

NOTE: Prior to starting work, prepare two AIRBAG RESISTORs (98299PA040).

WIRING DIAGRAM: