LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Mechanical (H4SO) >> Timing Belt >> Removal >> Belt Idler And Automatic Belt Tension Adjuster Assembly

Belt Idler And Automatic Belt Tension Adjuster Assembly

  1. Remove the belt idler.
    Fig 1: Identifying Belt Idler
    G05659765Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the automatic belt tension adjuster assembly.
    Fig 2: Removing Automatic Belt Tension Adjuster Assembly
    G04997649Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals