LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Mechanical (H4SO) >> V-belt >> V-Belt TENSIONER Assembly And Idler Pulley

V-Belt TENSIONER Assembly And Idler Pulley

  1. Remove the V-belts. < Refer to , V-BELT , REMOVAL, V-belt.>
  2. Remove the bolt securing the V-belt tensioner assembly to the power steering pump bracket, and remove the V-belt tensioner assembly.
    Fig 1: Locating V-belt Tensioner Assembly
    G06650696Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolt securing the idler pulley to the A/C compressor bracket, and remove the idler pulley.
    Fig 2: Locating A/C Compressor Bracket Bolt
    G06650697Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals