LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Legacy GT Limited >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System Heater Ventilator And A/C >> Ambient Sensor (Auto A/C Model) >> Removal

Ambient Sensor (Auto A/C Model): Removal

  1. Disconnect the ground cable from battery.
  2. Remove the clips and remove the grille bracket. (Sedan model)
    NOTE: To prevent damage to the grille bracket, make sure to remove all clips.
    Fig 1: Locating Grille Bracket Mounting Clips
    G07914468Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the ambient sensor.
    1. Disconnect the connector.
    2. Remove the ambient sensor from the radiator lower panel.
      Fig 2: Disconnecting Ambient Sensor Connector
      G06652993Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals