Intake Duct: Assembly

Install the wastegate control solenoid valve and air control hose to the intake duct.
- Use new O-rings.
- When tightening the boost control solenoid valve, check that it is securely seated.
Tightening torque:

4 N.m (0.4 kgf-m, 3.0 ft-lb)

Fig 1: Locating Wastegate Control Solenoid Valve Mounting Screw
Courtesy of SUBARU OF AMERICA, INC.
Install the vacuum hose (A) and vacuum hose (B) from intake duct.

Fig 2: Identifying Vacuum Hose (A) And Vacuum Hose (B)

G06649145

Courtesy of SUBARU OF AMERICA, INC.