Rear Quarter Trim: Removal
- Remove the rear seat. < Ref. to REMOVAL , Rear Seat. >
- Remove the seat belt lower anchor bolt.
- Remove cap (B) on the upper side of the rear quarter pillar front trim.
Courtesy of SUBARU OF AMERICA, INC.
NOTE: Remove molding (A), and remove the cap from the backside of the pillar trim being careful not to damage the trim. - Remove the bolt and screw, and remove the rear quarter pillar front trim.
- Remove covers (A) and (B).
- Remove the clips and screws, and remove the rear quarter upper trim.
- Remove the rear floor spacer.
- Remove the luggage room end covers.
- Remove the bolt and screws, and remove the rear quarter lower trim.