Rear Wiper Arm

REAR WIPER ARM

REMOVAL
1. Detach the wiper arm cover (A).






2. Remove the nut and remove the wiper arm.






INSTALLATION
1. Install each part in the reverse order of removal.
2. Operate the rear wiper once.
3. Align the blade with the marking (A) of the glass.







Tightening torque:
T1: 6.0 N.m (0.61 kgf-m, 4.4 ft-lb)
T2: 8.0 N.m (0.82 kgf-m, 5.9 ft-lb)