Front Wiper Arm

FRONT WIPER ARM

REMOVAL
1. Open the front hood.
2. Remove the cap.
3. Remove the nut, and remove the arm.






INSTALLATION
1. Install each part in the reverse order of removal.
2. Operate the wiper once.
3. Align the wiper blade to ceramic print point mark (A) of front window panel.






Tightening torque:
T1: 6.0 N.m (0.61 kgf-m, 4.4 ft-lb)
T2: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
T3: 8.5 N.m (0.87 kgf-m, 6.3 ft-lb) by 115°.
T4: 22 N.m (2.24 kgf-m, 16.2 ft-lb)