List Of Self-Diagnosis Mode Operation
SELF-DIAGNOSIS MODE OPERATION CHART
| Speedometer, tachometer, fuel gauge, engine coolant temperature gauge | Microcomputer running type warning light, indicator light | AT select lever position indicator light | ODO/Trip indicator | SPORT shift indicator | Illumination (indicator needle, plate, ring, LCD) | Buzzer (SPORT shift buzzer) |
|---|---|---|---|---|---|---|
| Step 0. Processing to self-diagnosis function | ||||||
| Operating initial operation | Initial illuminating | Normal | Normal | Initial illuminating | Initial illuminating | Not beep. |
| Step 1-1. Check each indication after initial operation | ||||||
| Repeat the sweep operation (After holding on lowest position for one second, reaches to highest position within 5 seconds, and after holding on highest position for one second, reaches to lowest position within 5 seconds). | Light ON | With the highest brightness, illuminate the position sequentially at a cycle of 1.5 seconds. For the illumination order, refer to the illumination order chart. | Perform the segment check. For the illumination order, refer to the illumination order chart. | Perform the segment check. For the Illuminate order, refer to the illumination order chart. | illumination at the highest brightness. | Not beep. |
| Step 1-2. Press the trip knob (trip knob input is not accepted till the meter indicator needle reaches the highest position): sweep complete, AT select lever position indicator display is set | ||||||
| Speedometer, tachometer, fuel gauge, engine coolant temperature gauge | Microcomputer running type warning light, indicator light | AT select lever position indicator light | ODO/trip meter | SPORT shift indicator | Illumination (indicator needle, plate, ring, LCD) | Buzzer (SPORT shift buzzer) |
| After completing sweep in step 1-1, back to lowest position. | Light ON | Keep the position indicated when the trip knob is pressed. | Under bar "_" is displayed. | "1" is displayed. | Illuminate at the highest brightness. | Not beep. |
| Step 2-1. Press the trip knob, and hold it: Check each meter | ||||||
| All meters are moved simultaneously in every 0.5 seconds from the lowest position to highest position. Speedometer/Tachometer: Approx. 5 degrees at every movement. Water temperature /Fuel gauge: Moves 1 segment at a time. | Light OFF | Keep the position indicated that set in step 1-2. | Display the current meter directing angle on odometer. Ex.) Displays 135017 when Speedometer/Tachometer: 135 degrees, Engine coolant temperature gauge/Fuel gauge: 17 segments. | "↓ 2" is displayed. | Illuminate at the highest brightness. | Not beep. |
| Step 2-2. Release the trip knob: Specifying the meter directing position | ||||||
| Stop at directing position when the trip knob is released. | Light OFF | Keep the position indicated that set in step 1-2. | Display the current meter directing angle on odometer. | "2" is displayed. | Illuminate at the highest brightness. | Not beep. |
| Step 3-1. Press the trip knob, and hold it: Check illumination | ||||||
| Keep the position that specified at step 2-2. | Light OFF | Varying from the highest brightness (ILL6) to the lowest luminescence (ILL1) every second. After reaching at ILL1, repeat it from ILL6. | Illumination brightness is displayed in the trip meter. (From ILL6 to ILL1) | "↓ 3" is displayed. | Varying from the highest brightness (ILL6) to the lowest luminescence (ILL1) every second. After reaching at ILL1, repeat it from ILL6. | Not beep. |
| Step 3-2. Release the trip knob: Specifying the illumination brightness | ||||||
| Keep the position that specified at step 2-2. | Light OFF | Keep the brightness at the time when the trip knob is released. | Illumination brightness is displayed in the trip meter. | "3" is displayed. | Keep the brightness at the time when the trip knob is released. | Not beep. |
| Step 4-1. Press the trip knob: Check the beeping of SPORT shift buzzer (For AT model) | ||||||
| All meter indicator needle returns to lowest position. | Light OFF | Illuminate at the highest brightness. Keep the position indicated that set in step 1-2. | Illumination brightness is displayed in the trip meter. | "↑ ↓" is displayed. Blinks with buzzer. | Illuminate at the highest brightness. | SPORT shift buzzer beeps. |
| Step 5. Press the trip knob: Complete the self-diagnosis 1 cycle | ||||||
| All meter indicator needle returns to lowest position, and go back to step 1 after completion. | ||||||
- Illuminating order tableILLUMINATING ORDER REFERENCE CHART
Illuminating order 1 2 3 4 5 6 7 8 9 10 11 Go back to 1 and repeat Trip meter A/B AB A B A B A B A B A B ODO/trip meter 8888.8 0000.0 1111.1 2222.2 3333.3 4444.4 5555.5 6666.6 7777.7 8888.8 9999.9 888888 000000 111111 222222 333333 444444 555555 666666 777777 888888 999999 SPORT shift indicator All lights ON 1 2 3 4 5 E P R N D ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ ↓ ↓ Display time (seconds) 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5