Glove Box: Removal

Remove the front door scuff plate and front pillar lower trim. Refer to REMOVAL , Side Trim.
Remove the instrument panel side cover RH.

Fig 1: Identifying Instrument Panel Side Cover Hook RH
Courtesy of SUBARU OF AMERICA, INC.
Remove the console side panel lower RH.

Fig 2: Identifying Console Side Panel Lower Hook RH
Courtesy of SUBARU OF AMERICA, INC.
Remove the clips, and remove the glove box lower cover.

Fig 3: Locating Glove Box Lower Cover Clips
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws (A) and hooks (B), and disconnect the connector, and then remove the glove box assembly.

Fig 4: Identifying Glove Box Assembly Screws And Hooks
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip (1) in the glove box and damper strap (2).

Fig 5: Identifying Clip In Glove Box And Damper Strap
Courtesy of SUBARU OF AMERICA, INC.
Remove the left and right stoppers of glove box lid, and then remove the glove box lid.
NOTE: The glove box lid can be removed without using the glove box assembly.